чем тянуть с plc bristol ControlWave micro

[mak]

Вот такую бодягу подогнали. надо с этого контроллера вытянуть в IAS. Фирма называется bristol сейчас вроде дочерние предприятие emersona....
Есть ли у WW IOсервера к этой железке?

[Klinkmann_Msk]

Вот такую бодягу подогнали. надо с этого контроллера вытянуть в IAS. Фирма называется bristol сейчас вроде дочерние предприятие emersona....
Есть ли у WW IOсервера к этой железке?

Есть у WW единственный сервер под Bristol:
Bristol Babcock OPEN BSI IO Server 7.0 (7.0.0.14)
Overview

The Wonderwareâ Bristol Babcock Open BSIâ I/O Server is a Microsoftâ Windowsä application program that acts as a communications protocol server. It allows other Windows application programs to access data within Bristol Babcock Network 3000 Controllers. This server supports both serial and Ethernet communications with Bristol Babcock network of controllers and RTUs. The Wonderware Bristol Babcock Open BSI IO is not a standalone server. It requires the use of Bristol Babcock's "Open Bristol System Interface" software utilities (version 3.1 and later). Prior to executing and configuring this server, the OPENBSI driver must be properly configured and started. Bristol Babcock should be consulted for further instructions on installing their utilities. These utilities manage both the serial and the Ethernet communications lines as well as the network of controllers connected to those lines. It allows sharing of these resources among several application programs running concurrently under Microsoft Windows. All applications can use the standard interface that is provided. The NetView tool of Bristol Babcock must be running at the the time the sever is started. Otherwise the server will run but not connect to the driver. It will print a message in the Wonderware Logger and waits for the NetView to start.

Through the use of glabal messages, the Wonderwrae Bristol Babcock OpenBSI I/O server is able to access data from the direct attached Controller as well as from other Controllers in the same network.

While the server is primarily intended for use with Wonderware InTouchâ (version 3.01 and later), it may be used by any Microsoft Windows program capable of acting as a DDE, FastDDE, or SuiteLinkä client.

Думаю, он не подойдёт. Проще у Bristol-а поискать OPC-сервер.